The completed GPO-2 Tesla Coil. The height from the ground to the
top of the discharge electrode is approximately 9 feet, 4 inches tall.
A test of the GPO-2 coil at less then 50% maximum input power.
This image was taken with a Sony digital camera (not a time exposure).
The equivalent shutter speed is about 1/60th second.
Another image (1/60th second) of the coil at less then 50% input power.
Even at this input level, the arcs seen by the naked eye were almost 6 to
7 feet in length from each corona point. After the GPO-2 coil is
installed at MASM, more spark images will be posted here.
